PULVEIZER FZ LLC provides a complete range of conveyor belt repair materials for cuts, punctures, tears, holes and damaged belt covers. Cold repair systems are designed for practical on-site maintenance, helping reduce downtime and extend conveyor belt service life.

Repair Materials


Material Purpose
Rubber Repair Patches Plain, diamond and fabric-reinforced patches for damaged belt areas.
Cold Vulcanizing Cement Bonding adhesive for rubber and repair materials.
Primer / Activator Improves bonding performance where required by the repair system.
Cleaning Solution Removes dust, oil and contamination before bonding.
Rubber Filler Compound Fills deeper cuts, voids and damaged sections before patching.
Repair Tools & Rollers Brushes, buffing tools and rollers for surface preparation and consolidation.


Repair Process

  • Clean & Prepare :Remove loose/damaged rubber and grind the area to create a clean, sound bonding surface
  • Clean Surface :Remove grinding dust, oil and contamination. Ensure the surface is clean and dry.
  • Apply Primer & Cement:Apply primer where required, followed by the recommended cold vulcanizing cement.
  • Apply Patch :Position the repair patch accurately and press firmly onto the prepared area.
  • Roll & Press :Roll from the centre toward the edges to remove air pockets and improve contact.
  • Cure & Use :Allow the repair to cure for the time specified by the product manufacturer before service.

Key Benefits

  • Strong Bond
  • High Abrasion Resistance
  • Impact Resistant
  • Easy On-Site Application
  • Reduced Downtime
  • Extended Belt Life

Typical Applications

  • Mining
  • Coal Handling
  • Cement Plants
  • Steel Plants
  • Power Plants
  • Fertilizer Plants
  • Bulk Material Handling
  • Recycling


Technical Note


Mixing ratio, pot life, flash/drying time, curing time and service conditions vary by product. Always follow the current manufacturer Technical Data Sheet (TDS) and Safety Data Sheet (SDS).